Description: The Construx Alien Series Terrordrone is a 105-piece set that allows children to build a wide variety of winged alien creatures. This set introduced several new pieces to the Construx line, including green panels with hot pink wing prints on them, hot pink tubing, hot pink suction cups, and hot pink landing gear. The set includes jointed connector nuts to allow children to move their winged creatures into different positions. Designed for children ages 5 years and older.
Accessories: 105 Construx Alien Series pieces, including, but not limited to the following:
- FPT16703 - #6203 Construx Alien Series "Terrordrone" instruction/idea booklet.
- FPT16704 - Large green triangular/sail-shaped panel that resembles a sail on a sail boat. One sides of the triangle is curved. The panel has hot pink "wing vein" designs on the front. The back side has a "L" imprint for left. Measures 4-1/4" long x 2" wide.
- FPT16705 - Large green triangular/sail-shaped panel that resembles a sail on a sail boat. One sides of the triangle is curved. The panel has hot pink "wing vein" designs on the front. The back side has a "R" imprint for right. Measures 4-1/4" long x 2" wide.
- Connector beams:
- FPT6516 - 6 each - Black angled connector beam (measures 3-1/2" long, 1/2" wide, 1/2" deep).
- FPT16639 - Black 5-1/4" long left curved beam. The beam is slightly curved with a sharp curve on the left side. Both ends of the beam have a connector hole in the end. The inside of the beam has a "Fisher-Price" imprint and a "L" imprint for "Left" side.
- FPT6594 - Black 5-1/4" long right curved beam. The beam is slightly curved with a sharp curve on the right side. Both ends of the beam have a connector hole in the end. The inside of the beam has a "Fisher-Price" imprint and a "R" imprint for "Right" side.
- FPT6517 - 2 each - Black 2" long straight connector beam (measures 2" long, 1/2" wide, 1/2" deep).
- FPT6518 - 16 each - Black short straight connector beam (measures 1/2" long, 1/2" wide, 1/2" deep).
- Connector Nuts:
- FPT6519 - 13 each - Dark grey 6-peg connector nut (measures 3/4" long, 3/4" high, 3/4" deep).
- FPT6447 - 8 each - Black 4-peg jointed connector nut (measures 3/4" long, 3/4" high, 3/4" deep).
- FPT6482 - Green diamond-shaped 4-peg connector nut with a hole in the center of the diamond (measures 1-1/8" long, 1/2" wide, 5/8" deep).
- FPT16610 - 2 each - Clear plastic tire that attach to a connector pulleys that double as wheels (measures 1-3/4" diameter, 3/8" thick). The tire has a raised "Fisher-Price" imprint on the side.
- FPT6521 - Black large cylinder (measures 2-1/2" long, 2" diameter). One end of the cylinder is closed with a molded recessed plus (+) shape and a hole in the center. The other end is open with a jagged edge.
- FPT16630 - 2 each - Black half-circle disk (measures 2" diameter, 1" tall). The disk has a hole in the top, and the edge of the disk has 4 sides with 2 oblong holes.
- FPT16270 - 24 each - White Glow-In-The-Dark tiny cylinder (Measures 1/2" long, 3/8" diameter). The cylinder is hollow inside.
- 2 each - FPT16706 - Hot pink landing gear with 2 skis (measures about 2" long).
- FPT16707 - 4 each - Hot pink flexable plastic tubing (measures about 1/8" diameter, 3-1/2" long).
- FPT16708 - 4 each - Small round hot pink suction cup.
- FPT16710 - 2 each - Hot pink single c-clamp with a square connector that has a rounded C-shape on the side (measures 1" long, 1/2" tall, 1/2" wide).
- FPT16709 - White (glow-in-the-dark) lazar guns with a long gun in the center and 2 shorter guns on the sides. The shorter guns are rised a bit higher than the center gun. There are 4 round silver beams around the base of the lazar guns.
Other Information: This set was sold in a 7" long, 7" high, 2-1/4" deep box.
|Please, if you have any information or details about this toy that isn't mentioned above then e-mail us. Thanks!