Fisher Price
Featured Toy

#6001 Construx Trailblazer Set w/ Giant Stoarge Case
Years Made:
Fisher-Price Toy Department
Department 7:
Playsets
1985-1985
Fall Only


Larger Photo


Larger Photo

Description: This 150-piece Construx Imagination Series set comes with enough pieces to enable children to build a variety of "off-road" vehicles, and more! The set comes in an orange plastic case that can hold up to 1000 Construx pieces. The case has adjustable and removable compartments for sorting Construx pieces. Designed for children ages 5 years and older.
Accessories: 150 Imaginatin Series Construx pieces including, but not limited to the following:
  • FPT16618 - Large orange plastic storage case that can hold over 1000 Construx pieces. The case has a black hinged handle and 2 black positive lock latches on the side to prevent accidental openings.
  • FPT16619 - Black removable divider that fits into the FPT16618 storage case. The divider creates 6 compartment in the storage case.
  • FPT14767 - #6001 Construx Trailblazer Set instruction/idea booklet.
  • Panels:
    • FPT16592 - unknown number each - Square blue flat panel (measures 2" long, 2" wide).
    • FPT16602 - unknown number each -Flat blue square panel with one corner cut off at an angle (measures 2" long, 2" wide).
    • FPT16603 - unknown number each - Small blue flat rectangular panel (measures 2" long, 3/4" wide).
    • FPT16623 - unknown number each - Rectangular dark blue flat panel (measures 4-3/8" long, 1-7/8" wide).
  • Connector beams:
    • FPT6560 - unknown number each - Grey 4-1/4" long straight connector beam (measures 4-1/4" long, 1/2" wide, 1/2" deep).
    • FPT6502 - unknown number each - Grey 2" long straight connector beam (measures 2" long, 1/2" wide, 1/2" deep).
    • FPT6503 - unknown number each - Grey short straight connector beam (measures 1/2" long, 1/2" wide, 1/2" deep).
    • FPT16565 - unknown number each - Grey angled connector beam (measures 3-1/2" long, 1/2" wide, 1/2" deep).
    • FPT6561 - unknown number each - Flat blue connector beam with a hook on each end. The beam has a "Fisher-Price" imprint on the side (measures 3-3/4" long, 1/2" wide).
  • Connector Nuts:
    • FPT6504 - unknown number each - Blue 6-peg connector nut (measures 3/4" long, 3/4" high, 3/4" deep).
    • FPT6447 - unknown number each - Black 4-peg jointed connector nut (measures 3/4" long, 3/4" high, 3/4" deep).
    • FPT6448 - unknown number each - Orange 5-peg connector nuts with a female slide connector on one side (measures 15/16" long, 3/4" high, 3/4" deep).
    • FPT16567 - unknown number each - Yellow round pulleys/wheels with a connector molded onto one side (measures 15/16", diameter, 9/16" high).
  • FPT6487 - unknown number each - Black rubber tires that attach to the connector pulleys that double as wheels (measures 1-3/4" diameter, 3/8" thick).
  • FPT16620 - unknown number each - Wide black rubber tire that attach to wide wheels. (measures 1-3/4" diameter, about 2" thick).
  • FPT16621 - unknown number each - Wide yellow wheel (measures about 1-" diameter, about 2" thick).
  • FPT16572 - Tiny yellow cylinders (Measures 1/2" long, 3/8" diameter).
  • FPT16573 - unknown number each - Long thin yellow rod.
  • FPT16622 - unknown number each - Red large cylinder (measures 2-1/2" long, 2" diameter). One end of the cylinder is closed with a molded recessed plus (+) shape and a hole in the center. The other end is open with a jagged edge.
  • FPT16570 - 2 each - Square green cockpit seat with a slightly raised "backrest" on the top edge and molded gadgets and handles molded on the top edge of 2 sides. The "seat" is square inside with a connector hole in the center of the bottom. The bottom of the cockpit has an imprint marked "©1983 Fisher-Price Toys Division The Quaker Oats Co. Made in USA". (measures 2" deep, 2" wide, 1-1/2" tall).
  • FPT6604 - unknown number each - Short reddish-orange propeller with a squared connector piece on the end. One side of the blade is marked "Fisher-Price" (measures 2" long, 1/2" wide, 1/2" deep).
  • FPT6576 - unknown number each - Large light dark grey squared engine with a round air cleaner and other molded gadgets on top (measures 2" long, 1-7/8" wide, 3/4" tall).
  • FPT16640 - unknown number each - Grey rounded jet pod engine with a rounded body and a rounded exhaust on the back and a square connector piece on the bottom. One side of the body has a rectangular opening that shows the hollow inside of the body. Inside the body has a "L" imprint for left side (measures 1-5/8" long, 1" tall, 3/4" wide).
  • FPT6486 - unknown number each - Grey rounded jet pod engine with a rounded body and a rounded exhaust on the back and a square connector piece on the bottom. One side of the body has a rectangular opening that shows the hollow inside of the body. Inside the body has a "R" imprint for right side (measures 1-5/8" long, 1" tall, 3/4" wide).
  • Construx figure(s) - detachable figure including:
    • FPT16577 - Orange "body" with a chest, a round peg on top to connect a hear, and 2 round pegs on the sides to connect arms. The bottom has a blue section that swivels to connect legs to.
    • FPT6580 - Left flesh-colored (Caucasian) arm. The arm has a rounded shoulder and a squared fist on the end. The arm has a recessed connector hole by the shoulder and on the end of the hand. The arm is marked "L" for left.
    • FPT6579 - Right flesh-colored (Caucasian) arm. The arm has a rounded shoulder and a squared fist on the end. The arm has a recessed connector hole by the shoulder and on the end of the hand. The arm is marked "R" for right.
    • FPT6578 - 2 blue legs with 2 blue shoes on the bottom all molded together. The top of the legs has a rectangular hold in the center with a round "bar" that connects the top of the left leg to the top of the right leg.
    • FPT16596 - White space helmet that has an opening for a face to show through. The inside of the helmet has an oval-shaped circle with 4 pegs on the outsides to snap onto a head piece.
    • FPT6582 - Yellow construction helmet. The inside of the helmet has an oval-shaped circle with 4 pegs on the outsides to snap onto a head piece. Measures 7/8" wide, 3/8" high, 1-1/8" deep (including front bill).
    • FPT6581 - Caucasian head/face with brown eyes, eyebrows, and a brown moustache. The top of the head is flat with a slightly raised oval-shape on the top to connect hair or hat pieces.
Variations: None.
Other Information:
Please, if you have any information or details about this toy that isn't mentioned above then e-mail us. Thanks!


This Old Toy Fisher Price This Old Toy Fisher Price This Old Toy Fisher Price This Old Toy Fisher Price This Old Toy

This Old Toy
Fisher Price This Old Toy Fisher Price This Old Toy Fisher Price This Old Toy Fisher Price This Old Toy

EMail us at info@thisoldtoy.com

 

© 1998-1999 This Old Toy.Com. All rights reserved.
This Old Toy.Com is not affiliated with Mattel/Fisher-Price or any of it affiliates.